No Motobike Manufactor have had involvement in this product.
The use of a manufactures name and / or model designation to describe the
motorcycles on this site does not imply that the manufacturer endorses
the use of this application.
Conexão
This
description was created for the
Windows version of TuneECU and canbe applied
largely on the Android
version.
Carregando o SOFTWARE
O software está
disponível em Francês, Alemão, Italiano, Espanhol, Português
e Inglês;
a escolha é feita automaticamente baseada no idioma do sistema
operacional, ou manualmente,
através de <Menu>
Opções - Idioma.
- Conecte o cabo USB/OBD cable to theno conector da ECU da motocicleta, e o lado USB no computador.
- Gire a chave para a posição “ON” e o botão do corta-corrente na posição “RUN”, mas não ligue o motor.
- Inicie o TuneECU e aguarde até que a conexão seja estabelecida.
vermelho para laranja piscante, e depois verde piscante.
Vermelho – desconectado
Laranja – conectando
Verde – conectado
Se a conexão na ECU não for automática, selecione a opção “Conectar” no menu “ECU”.
Este procedimento confirma que o TuneECU está comunicando com a ECM.
Connection to the Walbro ECU:
Note: For the Walbro models is when using TuneECU for Android, still a converter cable,
FTDI-USB-RS232 12V, required.
- Connect the serial cable with the 6-pin diagnostic socket of the bike.
- Do not connect the 2-pin connector.
- Start now TuneECU.
- Select the assigned COM port in the menu
"Options-serial-interface" the
software must still be offline at this time, not connected with the bike,
(auto-connection must be menu "Options" deselected). - Turn on the ignition
- Now select the menu "ECU" <Connect>
Após o identificador ficar verde , a comunicação com a ECM é estabelecida, quando:
• O númeo do Vin, Serial da ECU e informação base de Mapa são mostradas no painel de
informações da ECU.
• O ícone 'Map Edit' muda para um ícone verde de 'Baixar' (se um mapa já estiver carregado no
programa).
Neste ponto, o TuneECU está pronto para as funções de Edição de Mapas, Diagnósticos e Testes.
TuneECU possui 3 modos de operação:-
Editar
Mapa: |
Edição
de mapas e programação da ECU. |
Diagnósticos:
|
Vizualizar todos os sensores do motor. |
Testes:
|
Ajustes e testes de alguns componentes da moto. |
- Edita Mapa: Edição e programação dos mapas da ECU
- Diagnósticos: Checagem de sensores de gerenciamento do motor
- Testes: Ajustes e testes de alguns componentes da motocicleta
A seleção do modo é feita
clicando-se no botão apropriado. (Fig.3)
Fig. 3
!!
Important note !!
No Motobike Manufactor have had involvement in this
product.
The use of a manufactures name and / or model
designation to describe the
motorcycles on this site does not imply that the manufacturer endorses
the use of this application.
All
care has been taken in the creation of this page, however, the author
cannot guarantee the completeness and accuracy of this
information.