Câble adaptateur nécessaire pour KTM:
***Fig.1***
***Fig.2***
- 06-09 YZF-R6 faisceau d'injecteur secondaire (coté faisceau principal)
- 06 YZF-R6 faisceau d'injecteur (faisceau additionnel)
- Honda CBR600RR faisceau de câbles d'allumage
Item Title: "6-Way Plug Kit (B6AP) Sumitomo type"
Price: $2.65 plus Shipping
or Tuning Center Otto Leirer in 7442 Lockenhaus Austria, here is the direct Link .
Price € 3,50 plus Shipping
There is also a ready-configured cable, here's the Link .
Another source is the company X-MAS Motorcycle Electrics in Vienna
Item No. V-21330 (multi-connector 2.2 mm 6-pin) price at the time (Okt.2010) € 3.90,
shipping costs please contact X-MAS Motorcycle . Many thanks to Lars for this information.
OBDII individual components
Another source TUNE ECU CABLE KIT for the KTM engines, get e.g. here: http://www.cjdesignsllc.com
And here another source in UK for a TUNE ECU CABLE KIT for the KTM engines:
http://www.zenoverland.com/bikebits/ktm_ecu_cable.html
Yet another source in UK for FTDI cable and/or KTM-adapter : Lonelec UK
Yet another source in Italia for FTDI cable and/or KTM-adapter : ECU VONIX
***Fig.3***
Many thanks to Alain for the pictures.
Un lien pour se faire l'adaptateur compatible 1190/1290
Il peut parfois avoir des
problèmes de déconnexion avec l'ECU KTM, notamment avec le moteur en
marche.
Une amélioration peut-être obtenue en modifiant les
paramètres du port COM virtuel.
Les paramètres suivant sont un exemple qui ont aidé à résoudre ce
problème pour certains utilisateurs.
Toutefois ces réglages n'apportent parfois aucune amélioration pour
d'autres.
Ces paramètres sont gracieusement communiqués par "Tuning Center Otto
Leirer" en Autriche.
Encore une fois un grand merci à Otto.
Another Tip, that can possibly
help comes from "moto-abruzzo" from the Aprilia forum.
Link the
cable shield with the ground pin of the OBD connector.
See the following picture.
Note: the picture shows the connection on pin 5 for Aprilia, KTM uses pin 4 as ground.
Thanks "moto-abruzzo" from the Aprilia-Forum
Another tip from "ktmguy" from the KTM forum,Thanks ktmguy
To
avoid disconnection issues check and fix the following:
Make sure the shield of the USB cable is fixed to the negative of the
cable.
See the wire and shield together in the heat shrink in the following
picture.
on with some heatshrink around it.
He also
fitted a ferrite choke on the cable as you see here:
On his
bike Tuneecu disconnected as soon as he started the engine, these 2
mods fixed the issue
and now it stays on no problem.
Tous
les soins ont été apportés à la création sur cette page,
toutefois l'auteur ne peut garantir l'exhaustivité et l'exactitude de
ces informations.